Hello, welcome to the official website of KDP MACHINERY JIANGSU CO.,LTD.! Phone:0510-86578805
中文版 | ENGLISH
Home
About Us
Company Profile
Company Culture
Honor
Production strength
Cooperative partner
Product
Detachable plate heat exchanger
Semi-welded heat exchanger
Fully welded plate heat exchanger
Food grade multi-section plate heat exchanger
Plate heat exchanger unit
Pressure vessels and water treatment
Project
MVP Steam Package
Multi-effect evaporation complete equipment
General contracting of RO system project of ionic water treatment
General contracting of water treatment project
News
Company news
Industry Information
Application
Case
Message
Contact us
Company News
Industry News
Steam ejector: What are the application methods of steam ejector?
A large amount of flash steam is generated during the discharge of condensate, which wastes energy and pollutes the environment. The flash steam generated by condensate can be recovered by steam ejector condensate recovery device, and can be reused after improving the steam grade.
19
2021
/
07
Removable plate heat exchanger: cleaning method of removable plate heat exchanger
Removable plate heat exchangers have been widely used in some areas such as central heating and chemical industry. Let's look at the cleaning methods of removable plate heat exchanger.
16
06
Removable plate heat exchanger: What is the installation method of removable plate heat exchanger?
The installation of removable plate heat exchanger has become a problem faced by most users at present, because even the best products always need maintenance. When we took it apart for cleaning, we decided to install it again. Today, let's learn the installation method of removable plate heat exchanger.
01
Plate heat exchange unit: How to judge whether the plate heat exchange unit is blocked?
If the pressure difference between the supply and return water at the primary side or the pressure difference between the inlet and outlet of the secondary side heat exchanger exceeds 0.15 MPa, and the temperature of the secondary water supply is not hot, please check whether the plate heat exchanger unit is blocked.
27
05
Plate heat exchange unit: What are the composition characteristics and working principles of the heating plate heat exchange unit?
The plate heat exchanger unit is composed of plate heat exchanger, frequency converter, water pump, valve, filter, distribution box, instrument and control system connected through pipes. Pre-assembly shall be carried out in the factory, and the heat exchange equipment shall be installed on the same base. After arriving at the installation site, the water make-up pipe, the primary side and the secondary side shall be connected, and the power can be turned on for operation. So, what are the composition characteristics and working principles of the heating plate heat exchange unit? Today, let's have a look.
11
Plate heat exchange unit: What are the advantages of plate heat exchange unit compared with shell-and-tube heat exchanger?
Plate heat exchanger unit is a kind of heat exchanger. It is a new type of heat exchanger that stacks a series of corrugated metal plates. Thin rectangular channels are formed between the plates to exchange heat through the plates. So, what are the advantages of plate heat exchanger unit compared with shell and tube heat exchanger? Let's make a brief introduction today.
29
04