Hello, welcome to the official website of KDP MACHINERY JIANGSU CO.，LTD.! Phone：0510-86578805
中文版 | ENGLISH
Home
About Us
Company Profile
Company Culture
Honor
Production strength
Cooperative partner
Product
Detachable plate heat exchanger
Semi-welded heat exchanger
Fully welded plate heat exchanger
Food grade multi-section plate heat exchanger
Plate heat exchanger unit
Pressure vessels and water treatment
Project
MVP Steam Package
Multi-effect evaporation complete equipment
General contracting of RO system project of ionic water treatment
General contracting of water treatment project
News
Company news
Industry Information
Application
Case
Message
Contact us
Company News
Industry News
Precautions for marine plate heat exchanger?
Marine plate heat exchangers are now widely used in many industries in China, but many friends will encounter many failures when using them. The following is a brief introduction to the precautions of marine plate heat exchangers?
18
2022
/
11
What should be paid attention to when selecting the gasket of plate heat exchanger?
According to the analysis, the length of the sealing perimeter is 6~8 times of the heat exchange area (for example, the expansion length of the sealing gasket is about 4 meters for a single-plate heat exchanger with an area of 0.5 square meters). The thin sheet is very thin and has poor rigidity.
08
Dry goods sharing! What is the sealing gasket of plate heat exchanger
The sealing gasket of plate heat exchanger is one of the important components of plate heat exchanger. It is a ring made of materials that cause plastic deformation and have certain strength. Most gaskets are cut from non-metallic plates, or made by professional factories such as asbestos rubber plate, asbestos plate, polyethylene plate, etc. with specified dimensions. There are also metal-clad gaskets made of non-metallic materials such as asbestos wrapped with thin metal plates (white iron plate, stainless steel). There is also a spiral wound gasket made of thin steel plate and asbestos rope.
31
10
Three common installation methods of plate heat exchanger gasket
The one-way flow of the plate heat exchanger gasket means that the heat transfer medium flowing from the right corner hole of the heat exchanger plate flows out from the right corner hole.
19
What are the advantages of marine plate heat exchanger?
The above article is about the advantages of the marine plate heat exchanger, and it also shares a good manufacturer in the content. If you have any needs in this aspect, you can check it. I hope it can help you.
Principle of marine plate heat exchanger?
In short, you can come here to consult about the principle of marine plate heat exchanger. After reading the article, if you encounter this kind of thing, you will know which way to choose. I hope it can help you.
29
09
