Hello, welcome to the official website of KDP MACHINERY JIANGSU CO.，LTD.! Phone：0510-86578805
Manufacturer of plate heat exchanger
Release time:
2020-08-31
Due to the high steam temperature, the plate heat exchanger may also have various failures such as liquid leakage, so the operators need to check all equipment after completing the operation on the same day to prevent the failure of the next day, affecting the whole industrial process. This is the end of the explanation about the plate heat exchanger manufacturer. Thank you.
What is the plate heat exchanger and what are the characteristics of the products made by its manufacturers? Next, I will introduce the manufacturers of plate heat exchangers in detail.
The products made by the plate heat exchanger manufacturers are widely used in many fields, such as medicine, food, chemical fiber, light textile, electric power, chemical industry, mining and so on. They can also be used for evaporation heating, condensation cooling, sterilization and disinfection, waste heat recovery and other situations. The plate heat exchanger manufacturers also play a huge role in the chemical industry. The plate heat exchanger produced by them can be used in many kinds of factories such as titanium oxide, alcohol fermentation, resin synthesis, electrolytic soda production and rubber production.
From the above, we also know that the manufacturers of plate heat exchangers have provided help for many industrial processes, so how to repair the faults after these manufacturers have purchased the products of the manufacturers of plate heat exchangers? If the clamping size is not in place during use, the size is uneven or the clamping bolt is loose. Still, some of the sealing gaskets are separated from the sealing groove, and there are dirt and aging on the sealing surface. There are also plate deformation and assembly dislocation, which caused cracks in the sealing groove of the running plate. The above three conditions will cause leakage of the plate heat exchanger, so how to deal with it? Re-clamp the equipment according to the clamping dimensions provided by the plate heat exchanger manufacturer without pressure. The size should be uniform and the deviation should not be greater than or less than 0.2 mm. The parallelism should be kept within 2 mm. Then mark the leaking parts, check one by one, reassemble, or replace the gasket. Remove the plate without accessories. It must be cleaned before continuing to use.
Due to the high steam temperature, the plate heat exchanger may also have various failures such as liquid leakage, so the operators need to check all equipment after completing the operation on the same day to prevent the failure of the next day, affecting the whole industrial process. This is the end of the explanation about the plate heat exchanger manufacturer. Thank you.
