Hello, welcome to the official website of KDP MACHINERY JIANGSU CO.，LTD.! Phone：0510-86578805
What types of steam-water mixers are there? What are their characteristics?
Release time:
2020-12-09
The steam-water mixer can be used to heat water in the solution chamber and send it to the water tank, replacing the direct heating method of high noise and strong oscillation steam in the hot water tank. It is used to preheat deaerated water and is suitable for water-water heat exchange.
The steam-water mixer is divided into DLT serial flow pipeline steam-water mixer and QS immersion steam-water mixer. The pipeline steam-water mixer is a direct heating device installed on the pipeline, which has the characteristics of high thermal efficiency, low noise, simple device and no occupied space, and is widely used in heating of heating and air-conditioning systems.
Immersion steam-water mixer is an energy-saving steam heater with fast heating speed, good silencing effect and quiet heating of cold water to boiling point. A new silencing structure is adopted to reduce the noise to less than 50dB, which solves the problems of high cost, large noise, large area of machine room and large number of equipment in traditional heating methods, and can be linked with intelligent automatic water temperature controller and automatic liquid level control alarm system to realize the full automatic operation of the hot water preparation system.
The steam-water mixer is the steam heating equipment required in the bathhouse water supply, domestic hot water supply system and hot water heating system. It is often used for fluid mixing heating in food brewing, medicine, chemical, petroleum, rubber, paper and other industries. It is used in hot water heating system to replace plate heat exchanger with heating device.
The steam-water mixer can be used to heat water in the solution chamber and send it to the water tank, replacing the direct heating method of high noise and strong oscillation steam in the hot water tank. It is used to preheat deaerated water and is suitable for water-water heat exchange. The tubular steam-water mixing heater is composed of a core tube and a shell. The core tube wall has several inclined holes. The relatively small inlet end of the core tube is located at the throat. The middle part of the core tube is a mixed heating zone, and the steam zone is between the core tube and the shell.
The above is the classification and characteristics of steam-water mixers introduced for you. I hope it can help you!
