Hello, welcome to the official website of KDP MACHINERY JIANGSU CO.，LTD.! Phone：0510-86578805
Steam-water mixer: precautions for installation of pipe-type steam-water mixer
Release time:
2021-01-07
The pipe-type steam-water mixer is a kind of equipment installed on the pipe, which directly uses steam to heat water.
Do you know the precautions for the installation of the pipe-type steam-water mixer? Today, let's get to know!
The pipe-type steam-water mixer is a kind of equipment installed on the pipe, which directly uses steam to heat water. It is composed of the core pipe and the shell. In the mixing zone, the steam from the inclined hole and the water from the throat are mixed and heated at high speed to produce hot water. Steam and water are directly exchanged in the steam tube heating furnace without noise, vibration and high heat exchange efficiency.
The pipe-type steam-water mixer is widely used in production and domestic water and heating systems such as factories, hospitals, hotels, bathtubs and residential buildings. The following points should be noted for its use:
1. Steam pressure: steam pressure must be greater than 0.05MPa water pressure;
2. Relative position to the water pump: suitable for installing the steam pipe heater on the suction side of the water pump;
3. The steam pipe system used for the domestic hot water system cannot enter the shower directly. In order to prevent scalding accidents, a transition water tank is usually set;
4. The pipe-type steam-water mixing heater can be installed horizontally or vertically, but the steam inlet shall be ensured to be upward or horizontal;
5. In order to observe and adjust the working state of the steam-water mixer, valves, pressure gauges and thermometers are generally installed before and after the tubular steam-water mixing heater;
6. When the pipeline steam-water mixer is started, the water pump shall be started first, and then the steam valve shall be opened; In case of shutdown, the steam valve shall be closed first and then the steam pump;
7. The tubular steam-water mixer uses steam to directly heat the water without noise and vibration. It is not completely noiseless, but the operating noise is lower than 65 dB.
The above is the precautions for the installation of pipe-type steam-water mixer introduced for you. I hope it can help you!
