PRODUCTS CENTER
Switzerland Plate-and-shell heat exchanger
Product Description
Plate-and-shell heat exchanger product introduction:
A plate-and-shell heat exchanger consists of a corrugated plate pack welded by plasma arc and housed within a shell, replacing the tubes of a conventional shell-and-tube heat exchanger. The corrugated plate pack serves as the heat-transfer element; the two fluid streams flow through the tube side and the shell side, respectively, to achieve heat exchange. As the fluids pass over the corrugated plates, highly turbulent flow is generated in a counter-current direction, significantly enhancing heat-transfer efficiency.
Product Advantages:
Compared with plate heat exchangers and shell-and-tube heat exchangers, plate‑shell heat exchangers feature a compact structure, reduced fouling, operation at small temperature differences, and resistance to high temperatures and pressures. They also eliminate the need for rubber gaskets, thereby combining the advantages of both types:
① The corrugated plate pack creates a highly turbulent flow path, resulting in an overall heat transfer coefficient that can be 3 to 5 times that of conventional shell-and-tube heat exchangers.
② Compact structure and small footprint. For the same heat transfer duty, its volume is only one-third that of a shell-and-tube heat exchanger, saving plant space and reducing capital investment.
③ Temperature-resistant and compression-resistant, The operating temperature can reach 800°C, and the operating pressure can reach 10.0 MPa. 。
④ In the flat flow channels, the fluid flows at high velocity, and the plate surfaces are smooth, making fouling unlikely; moreover, the plate pack can be removed for convenient cleaning.
Product Structure:

Plate and shell material selection: Custom production is available based on the materials specified by the user. Standard plate thicknesses are 0.8 mm, 1.0 mm, 1.2 mm, and 1.5 mm.
Material selection for plates and shell:
Plate material: AISI 304, AISI 316L, Titanium, Hastelloy, SMO 254, AISI 904, Duplex 2205, Nickel.
Housing material: carbon steel, AISI 304, AISI 316L, titanium, etc.

Application areas
Marine applications: used as engine preheaters, lubricating oil coolers, fuel preheaters, air cut-off intercoolers, thermal oil heaters, waste heat boilers, and more.
Chemical industry: cooling reaction heat in chemical processes, steam heating, heat recovery, regenerative heat exchange, etc.
Refrigeration industry: evaporators, condensers, oil coolers, economizers, recuperators, etc.
Metallurgy: heat recovery from waste liquids, cooling water supply for continuous slab casters, cooling ammonia liquor in tar units, electrolyte cooling, lubricant cooling, and more.
Petrochemical industry: heating crude oil to remove sand and water, recovering heat from process water, recovering heat from dry crude oil to preheat wet crude oil, cooling hot crude oil with seawater, etc.
Pharmaceutical industry: heating (and cooling) equipment for process media, etc.
Power industry: steam condensers, oil coolers, feedwater preheaters, fuel oil preheaters, exhaust gas condensers, and exhaust heat recovery systems.
Paper industry: heating pulp with hot water, cooling black liquor, recovering heat from boiler exhaust, and recovering waste heat during deinking processes.
Food industry: fatty acid deodorization preheaters (coolers), vegetable oil coolers, steam heaters, bio-oil coolers, etc.