Papua New Guinea All-welded plate heat exchanger

The HBR series heat exchangers feature adjacent plates arranged in a 180° staggered configuration and welded together as a single unit, enabling heat exchange between hot and cold fluids on both sides of each plate. In all-welded heat exchangers, the core heat-transfer element—the plate pack—is entirely welded using argon arc welding, with no sealing elements. Seals between the plate flow channels are formed by welding with filler material identical to the plate material. Consequently, these units not only offer the same high heat-transfer efficiency as detachable plate heat exchangers but, because their seals do not rely on elastic non-metallic materials, they can operate under conditions with medium temperatures up to 400°C and pressures of 3.0 MPa. This significantly broadens the range of applicable working media while also extending service life and reducing maintenance costs.

Product Description

The adjacent plates of the HBR series heat exchangers are arranged in a 180° staggered configuration and welded together as a single unit, enabling heat exchange between hot and cold fluids on both sides of each plate. In all-welded heat exchangers, the core heat-transfer element—the plate pack—is entirely welded using argon arc welding, with no sealing elements whatsoever. Seals between the plate channels are formed by welding with filler material identical to the plate material. Consequently, these units not only offer the same high heat-transfer efficiency as detachable plate heat exchangers but, because they do not rely on elastic non-metallic seals, can operate under media temperatures up to 400°C and pressures of 3.0 MPa. This significantly broadens the range of applicable working fluids while also extending service life and reducing maintenance costs. The plates, fabricated from stainless steel, titanium, or other materials via die pressing, feature smooth surfaces; combined with their unique flow channels, they exhibit minimal fouling tendencies and are easy to clean. To meet diverse application requirements, the length-to-width ratio of the heat-exchange plates can be optimized through design.

111