Papua New Guinea Semi-welded plate heat exchanger

A semi-welded heat exchanger consists of plate packs, each of which is formed by laser-welding two plates together. In this design, one side features welded seals while the other uses gasket seals, eliminating the risk of corrosion in the sealing strips.

Product Description

The semi-welded heat exchanger employs laser welding technology.

A semi-welded heat exchanger consists of plate packs, each of which is formed by laser-welding two plates together. In this design, one side features welded seals while the other uses gasket seals, eliminating the risk of corrosion in the sealing strips.

111

Laser Semi-Welded Plate Heat Exchanger Semi-welded plate heat exchanger

The laser semi-welded plate heat exchanger consists of alternating welded channels and conventional flow paths. A plate pack is formed by welding two plates together with their orientations reversed by 180 degrees, creating welded flow channels; adjacent plate packs are sealed with gaskets to form removable conventional flow paths. The sensitive medium flows through the welded channels, while the conventional medium flows through the conventional channels for heat exchange.

Laser-welded plate heat exchangers are particularly well suited for the evaporation and condensation of refrigerants such as ammonia and freon, and they also represent an ideal heat exchange solution for media that corrode gaskets in chemical and general process heat exchangers.

Unique flow channel design The advanced flow principle
The unique flow channel design increases turbulence as the fluid passes through the plate heat exchanger, enhancing heat transfer while reducing associated pressure loss. Even at low flow velocities within the exchanger, high heat transfer efficiency can be achieved. To meet the requirements of various operating conditions, we offer a range of plate configurations.

Glus-free seals that last longer

Because neoprene gaskets exhibit excellent corrosion resistance, laser semi-welded plate heat exchangers use this material for their gaskets. The bond-free system installs the gasket in a specially designed groove, minimizing its contact area with the process fluid and extending its service life. Additionally, these gaskets are easy to clean and offer good resistance to thermal stress.

Product Models

111

When the hot and cold media in a plate heat exchanger mix and trigger harmful reactions, a double-walled safety plate heat exchanger is required. These units are widely used in industries such as food processing, pharmaceuticals, municipal water supply, metallurgy, power generation, and chemical engineering.

Double-wall plates

The operating principle of the double‑plate wall safety plate heat exchanger is the same as that of a conventional plate heat exchanger. The difference lies in the fact that each heat transfer unit is welded from two plates, which are specially pressed to ensure perfect contact and minimize thermal resistance. Laser welding is used at the four corner ports to form a single heat transfer unit, equivalent to one plate in a standard detachable heat exchanger. It uses standard gaskets compatible with conventional plates. If cracks or perforations occur in the plates, any fluid leakage on either side will exit through the gap between the plate packs; the leaking fluid on each side remains under positive pressure, preventing cross‑contamination with the other side’s medium and ensuring the absolute safety of the medium on the opposite side.