Mauritius Four-sided removable all-welded hybrid straight-channel heat exchanger

The Jin Duobang plate-and-frame hybrid straight-channel heat exchanger is a fully welded plate heat exchanger with removable side panels. Its mixed-flow channel design features tubular passages between the plates, enabling effective physical cleaning of the tubes while allowing chemical cleaning on the opposite side. The maximum heat transfer area can reach 2,000 m².

Product Description

The Jin Duobang plate-and-frame hybrid straight-channel heat exchanger is a fully welded plate heat exchanger with removable side panels on all four sides. Its hybrid flow‑channel design features tubular passages between the plates, enabling true physical cleaning of the tubes while allowing chemical cleaning on the opposite side. The maximum heat transfer area can reach 2,000 m².

 

Advantages of the Jin Duobang plate-frame straight-channel plate heat exchanger:

1. Tubular channel, allowing direct flushing; and with a short flow path length, it is easy to clean;

2. With a constant flow cross-section and no numerous contact points created by staggered corrugations, solid particulate impurities in the medium are less likely to cause blockages;

3. Without the numerous contact points created by staggered corrugations, there is no gas adhesion at the contacts that could form bubbles, leading to additional pressure drop and reduced heat transfer performance;

4. During process design, fluid turns occur outside the heat transfer plates, and local eddies in the corner regions have no effect on heat transfer.

5. The maximum flow rate ratio between the hot and cold sides can reach 10:1;

6. The operating temperature can reach 350°C, and the operating pressure can reach 40 bar.

                                                                                                                                                 Tubular channels are formed between the plates.

 

Rinsing effect

 

Areas of application:

Saturated steam: The tube-side manifold structure can effectively handle saturated steam;

Gas: The plate structure features flexible connections, allowing the gas to heat and cool.

High-viscosity fluids: The corrugated side enhances the film coefficient for non-viscous fluids;

Granular fluid: Without obstructing contact points, fine particles flow more easily through the tube side;

Dirty fluid: The new hybrid series employs a three-pronged strategy to handle dirty fluids.