PRODUCTS CENTER
A semi-welded heat exchanger consists of plate packs, each of which is formed by laser-welding two plates together. In this design, one side features welded seals while the other uses gasket seals, eliminating the risk of corrosion in the sealing strips.
The HBR series heat exchangers feature adjacent plates arranged in a 180° staggered configuration and welded together as a single unit, enabling heat exchange between hot and cold fluids on both sides of each plate. In all-welded heat exchangers, the core heat-transfer element—the plate pack—is entirely welded using argon arc welding, with no sealing elements. Seals between the plate flow channels are formed by welding with filler material identical to the plate material. Consequently, these units not only offer the same high heat-transfer efficiency as detachable plate heat exchangers but, because their seals do not rely on elastic non-metallic materials, they can operate under conditions with medium temperatures up to 400°C and pressures of 3.0 MPa. This significantly broadens the range of applicable working media while also extending service life and reducing maintenance costs.
The detachable plate heat exchanger is a highly efficient, compact heat exchange device assembled from corrugated metal plates, gaskets, a pressure plate, clamping bolts, and other components. Thin flow channels are formed between the plates, allowing hot and cold fluids to flow in counter-current fashion on either side of the plates, enabling heat transfer through the plates and delivering high heat exchange efficiency.
Small steam‑powered rapid heat exchange units must be capable of immediately supplying stable‑temperature hot water when most employees turn on their taps at the same time, and maintain constant water temperature when some employees simultaneously shut off their taps. When a tap is first opened, excessive cold‑water discharge should not be required, and the water temperature must be safe to prevent scalding. The water quality must be hygienic; direct contact with industrial steam is prohibited, and long‑retention hot water should not be used. Heat exchangers should occupy minimal space in the equipment room, exhibit low scaling rates, require minimal maintenance, and feature unattended operation and alarm notification capabilities.
Address:No. 198, Qiaoqi Zhongshan Road, Xuxiake Town, Jiangyin City, Jiangsu Province
E-mail:info@jylzhr.com
E-mail:lz002@jylzhr.com
E-mail:lz003@jylzhr.com
E-mail:lz006@jylzhr.com
WhatsApp:8618921229130
The company operates steam-water mixer, steam ejector, removable plate heat exchanger, plate heat exchanger gasket, plate heat exchanger, cooler and other products